Catalog No. mmt02
It uses flexible coaxial cable.
When you install it in the device, it is freely bent by the hand.
It is the best for the cable for the measurement.
The cable assembly of the keycom is simple and practicable from the long experience.
Because it uses foam PTFE for the dielectric substance, the phase stability is large and low loss.
Characteristics
Insertion loss ( The maximum insertion loss : Standard insertion loss × 1.1 + 0.1 )
Model No.
Example of model number
CM06 D-
APC2.9(m)APC2.9(f)-
0500
| CM06 |
D |
- |
APC2.9(m)APC2.9(f) |
- |
0500 |
| Cable type |
The maximum frequency sign
|
|
Connector type combination |
|
The assembly length (mm)
0500 : 500mm |
Cable type
| Cable type |
Use maximum frequency (GHz) |
Outside diameter of cable (φmm) |
Characteristic impedance (ohm) |
Minimum bend radius (mm) *1 |
Operating temperature limit (degree) *2 |
Feature |
Reference semirigid cable |
| CM03 |
55.0 |
3.4 |
50 |
15 |
-40~125 |
Thin |
0.085" |
| CM06 |
40.0 |
4.2 |
50 |
30 |
-40~125 |
For measurement |
0.141" |
| CM07 |
26.5 |
5.8 |
50 |
45 |
-40~125 |
Low loss, for the measurement |
|
| CM08 |
18.5 |
7.5 |
50 |
50 |
-40~125 |
Low loss |
0.250" |
| CM09 |
11.0 |
8.5 |
50 |
54 |
-40~125 |
Super low loss |
|
| CM20 |
6.0 |
20.0 |
50 |
100 |
-40~125 |
(Consultation required) |
|
Ex )
*1 Bend radius (the inside) at the minimum: When wound up 360 degrees; the smallest inside bend radius that insertion a loss / reflection decrement quantity does not have a change.
*2 Please inquire when you hope outside this temperature range.
*3 Please inquire when the mechanical exterior reinforcement of the cable is needed.
The maximum frequency sign
| Sign |
A |
B |
D |
DS |
E |
F |
G |
| Maximum frequency |
18.5GHz |
26.5GHz |
40GHz |
46GHz |
50GHz |
60GHz |
65GHz |
Connector type
| Connector type |
N |
SMA |
3.5mm |
2.9mm(K) |
2.4mm |
1.8mm(V) |
| Use maximum frequency (GHz) |
11.0 |
18.5 |
26.5 |
40 or [46] |
50 |
60 or [65] |
Ex )
Inside of [ ] is a special type.
Assembly length
